CT-3T-HC

Membrane Capacity	<=50 gpd
Operating Pressure	40-100 psi
Operating Temperature	40-90 F
PH Operating Range	3-11
Turbidity Clarity	<1.0 NTU
Solids Removal (TDS)	<=2000 ppm
Cold Storage Tank Capacity	<=.75 gal.
Cold Water Production	1.5 gallon per hour/37-50 F
Hot Water Tank Capacity	1.0 Quart
Hot Water Production	1.5 gallon per hour/185 F
Dimension	13”W x 14”D x 16.5”H
Shipping Weight	50 lbs.

See Additional Faucets;
Click Below

* Our portable countertop reverse osmosis systems are perfect for Apartments, Condominiums, RV's, Trailers, or Mobile Homes.

Built-In 3-Stage Reverse Osmosis System: To reduce or remove Sediments, Hydro-Carbon Gases, Salts, Heavy Metals, Hardness, Minerals, etc. from the incoming supply water for purified water on demand at any time.

Built-In Hot and Cold Water Dispensing: Your choice of hot or cold water is available from the respective storage tanks. Instant Hot Water can be used for Coffee, Tea, Soups, etc. Cold water can be served to quench the thirst on extra hot days, or can be used for Ice Tea, Blended Drinks, etc.

Dual-Button activation for dispensing Hot Water: Provides safe dispensing by guarding against unexpected scalding or burns.

Hot and Cold Water Temperature Controls: Hot Water Temperature automatically set at 185 F. Cold Water Temperature adjustable from 37-50 F.

Separate On/Off Switches: Mounted in the rear of unit to offer a choice between Hot and Cold Water dispensing, or both.

Automatic Inlet Solenoid Shut-Off Valve: Allows water to enter the unit for processing of pure water when the internal storage tanks are low. Once the tanks reach full capacity, the valve closes and prevents overflow from occurring.

Automatic Tank Level Control Switch: Sends a signal back to the Automatic Inlet Solenoid Shut-Off Valve when the storage tanks become full of purified water to close the valve and prevent an overflow from occurring.

Indicator Lights on Front Panel: Informs you when water is being heated, cooled, or both.

Built-In Moisture Sensor: Sends a signal to the Automatic Inlet Solenoid Shut-Off Valve to close the valve in the event any Drips, Leaks, or Floods are detected to prevent damage to the system and the facility the unit is installed in.

Construction Materials: Corrosion-Proof Plastic including: Outside Cover, Mounting Frame, Filter Housings, Membrane Vessel Housing, Mounting Clamps, Cold Water Storage Tank, and Tubing. Corrosion-Proof Polypropylene Compression Fittings. Galvanized Plated Screws, Nuts, and Bolts.

Standard Features

1.) Ultra-Violet Module Assembly: Can be added as a Post-Dispensing Module to Sanitize the pure water from the possibly of any Water Bourne Bacteria that could be present inside the storage tanks due to the Chlorine being removed from the incoming water that was originally added for sanitary purposes.

2.) 75-150 gpd TFC membranes: Larger production Membranes are available to increase daily output of purified water.

Optional Features

Pre-Filter 1

The SED5MMFVER 5 micron filter uses Conventional Core, Micro-Fiber Technology encapsulated inside of a Proprietary Plastic Housing to remove Dirt, Rocks, Sand, Sticks, Bugs and other larger debris from untreated water. This 5 micron filter is manufactured by thermally fusing thousands of small polypropylene micro fibers together. Smaller particles, Bacteria, and super fine debris such as Silt and Clay pass through this filter because of the inefficient design and larger micron rating. This filter is better suited for Bath, Kitchen, Bar, or Island Sink Faucets and Shower Heads where larger debris plugs the faucet screen, as Pre-Filter for a multistage Reverse Osmosis system, or as a Pre-filter for Spas, Tubs, Tanks, Drums, etc. The Proprietary design restricts the consumer to only one choice of filter cartridge selection and one distribution entity when replacing expired or exhausted filters, which typically imposes a higher retail price and compromise in quality and performance.

Recommended Service Interval on Most Water Supplies: 1 Year

SED5MMFVER - Sediment Pre-Filter for Vertex Systems Part # TF-4056

Pre-Filter 2

The CF100MGACVER 100 micron filter uses Granular Carbon Technology encapsulated inside of a Proprietary Plastic Housing to remove Chlorine and other Hydro-Carbon Gases from untreated water. Small Granules of Bituminous Carbon are encapsulated in a Plastic container along with a very small micro-fiber pre-filter element. The inefficient design and larger micron rating lets all Sediments, Sand, Bacteria, and Debris pass through the cartridge, while only removing Chlorine and other Hydro-Carbon Gases in limited amounts. This filter is better suited for Bath, Shower, or Utility Sink type Faucets, or as a Pre-filter for Spas, Tubs, Tanks, Drums, Feeders, etc. where higher flow rates of water are required. The Proprietary design restricts the consumer to only one choice of filter cartridge selection and one distribution entity when replacing expired or exhausted filters, which typically imposes a higher retail price and compromise in quality and performance.

Recommended Service Interval on Most Water Supplies: 1 Year

CF100MGACVER - Granular Carbon Pre-Filter for Vertex Systems Part # TF-4057

Membrane

The MEM50TFCVER (50 gpd) .001 micron Membrane filter uses a Thin Film Composite Cellular Skin encapsulated inside of a Proprietary Plastic Housing to separate and remove Dissolved Solids, Salts, Minerals, Heavy Metals, Organic Matter, Pyroxene’s, Sub-micron Colloidal matter, Cysts, Bacteria, and other contaminants from untreated water. Water containing Dissolved Minerals and other Contaminants is forced under high pressure through a Semi-Permeable, Spiral Wound, Thin Film Composite Cellular Skin layered in several wrappings, to separate and rinse away the dissolved solids to a sewage drain, leaving only the Pure, H20 water molecules for consumption, production, processing, or manufacturing. The TFC Membrane skin has a broader PH tolerance than the CTA Membrane skin, it can remove a higher maximum threshold of dissolved solids, and removes a higher percentage of dissolved solids than the CTA Membrane is capable of removing. The TFC Membrane can be used on Municipal or Well Water with proper pre-filtration due the natural Bacteriostatic properties. Typical Rejection of minerals and impurities for the TFC Membrane is 95%-99% removal, compared to 70%-80% for the CTA Membrane. TFC Membranes are used in Vending machines and Bottled Water processing plants across the U.S.A. The Proprietary design restricts the consumer to only one choice of filter cartridge selection and one distribution entity when replacing expired or exhausted filters, which typically imposes a higher retail price and compromise in quality and performance. This is the best Membrane choice available for producing the highest purity water from a Residential Reverse Osmosis System.

Recommended Service Interval on Most Water Supplies: 1 Year

MEM50TFCVER - (50 gpd) Membrane Filter for Vertex Systems Part # MA-4203 > 18-150 gpd Membranes available.