Multi-Compartment “Proprietary” Mineral Tank: This New and Innovative tank design allows the opportunity for multiple types of Filtration Media to be contained and layered in one tank. The choice of Filter Media determines what contaminants will be reduced or removed from the water stream. For example, a multi-stage system might contain Cation Resin for Softening the water, Granular Carbon for Hydro-Carbon Gas reduction or removal, and NexSand for Sediment reduction or removal. Depending on the severity of the water condition, or, Municipal or Rural Water will also help determine what configuration best suits your needs.

Media-Guard “Proprietary” Internal Distributor System: This Reduces and or Removes Chlorine, Ammonia, and other Hydro-Carbon Gases from the incoming water supply. The “Patented” Filter Media employs a proprietary blend of Granulated Alloys that works on the principle of Redox to create an electrochemical reaction that renders harmful contaminants into a harmless, benign soluble state that is easily carried away by the water stream. The Alloys are encapsulated inside of a uniquely designed plastic internal distribution system that diverts the incoming water through the alloys as the first stage of contact to convert the Chlorine into a harmless compound. The distribution system isolates and separates the alloys from the Softening Resin media.

Zeolite Softening Resin Media: This naturally occurring Filter Media allows a Water Softener to perform as a “Dual-Purpose” Filtration system. Unlike conventional Synthetic Softening Resins, all varieties of Zeolite were created from volcanic ash that thousands of years ago were deposited in salt water beds, and over these many years, created the Zeolite. They are a member of the aluminum silicate mineral family which is associated with Sediment removal. A grain of Zeolite has thousands of times more surface area than a similar sized grain of sand, and is very porous, providing dual filtration for removal of Sediments, Precipitated Iron, and other precipitated debris down to 3 micron range. It can be backwashed less frequently than conventional sand filters. Also, in some instances Zeolite has also been known to reduce Ammonia from Municipal and Pool water. 

-When it comes to purchasing Water Treatment Equipment, you should NEVER do business with ANY company who does not have a C55 Water Treatment License, Liability Insurance, Bonding Insurance, and a Staff of Employees to provide Service and Tech Support when needed. There are so many "Fly by night" companies out there that this should be the very FIRST rule in your decision making process. Don’t be a statistic by becoming a victim of Water Treatment Scammers.

Optional Features

►SSRT Mineral Resin Bed “Patented”: Shallow Shell Resin Technology reduces the amount of Salt or Potassium Brine solution used to saturate the resin during each regeneration by 10-20 %, resulting in salt and water savings during the years of operation.
►Brine Tank Safety Float: Prevents air from entering the Brine solution during the regeneration process, providing uninterrupted brine saturation of the mineral resin. Also prevents water overflow inside the brine tank in the event of a malfunction.
►Low Voltage Power Supply: Insures Safe operation for all users. Meets international electrical requirements. Prevents risk of shock in the event of an electrical malfunction due to water damage or electrical short circuit.
►Brine Tank Salt Grid Plate: Raises the Salt or Potassium level 6” above the bottom of the tank minimizing Bridging or Coagulation at the bottom of the tank or inside the brine well and safety float assembly due to sediment deposits.

SmartSoft “PATENTED” CONTROL VALVE FEATURES

►Proportional Salt Brining “Patented”: Regenerates the Mineral Resin bed with the “Minimum” amount of Salt or Potassium Brine solution necessary to restore the resin capacity to maximum levels, which is calculated by the Micro-processor on actual gallons used from each batch of soft water and not a predefined amount of gallons, improving Salt and Water usage efficiency. Conventional Valves regenerate the entire capacity of the resin with a predefined amount of gallons used creating salt brining inefficiency.
►Variable Reserve Capacity “Patented”: Every 30 days the amount of soft water gallons needed for the reserve capacity account is adjusted to the actual reserve gallons used during the previous 30 days. If more reserve capacity is required, the reserve account is increased in proportion to what was used, and the standard system capacity is reduced. When less reserve capacity is needed, the reserve amount is lowered and the standard system capacity is increased.
►Hydraulically Balanced Main Piston: The self-cleaning Piston, Seal and Spacer assembly is extremely rugged and durable preventing premature deterioration of the internal functionality of the control valve, and extending the life of the drive motor mechanism.

STANDARD CONTROL VALVE FEATURES

►Countercurrent Up-flow Valve: In the First Cycle of a regeneration, the Salt Brine solution is precisely drawn into the Mineral Resin bed at a slow rate of flow and low pressure to prevent the resin bed from becoming “Fluidized” or separated, improving Salt and Water usage efficiency. Down-flow Valves “Fluidize” or separate the mineral resin bed by Back-washing or Fast Rinsing the resin bed in the First Cycle creating salt brining inefficiency.
►Programmable Electronic Cycles: All regeneration cycles including the Brine Draw, Slow Rinse, Backwash, Fast Rinse, and Brine Refill are adjustable from 1-99 minute increments for ultimate efficiency. The length of time needed for the entire regeneration can be decreased to save water and salt, or increased to handle problem water conditions such as Iron, Rust, Sediment, Sand, etc.
►Meter Override Day Regeneration: Allows the Control Valve to be used with problem water conditions or low water use when more frequent regenerations are required, allowing the user to by-pass the meter initiation and regenerate the system at a timed interval.
►1” Internal Distributor System: Allows for higher flow rates of Soft Water inside the Resin Tank and Control Valve Body due to the 1” ported size pipe, resulting in less friction and pressure loss to the house or facility under extreme water flow demands.
►1” Hard Water By-Pass Valve: Allows for a temporary by-pass of the soft water system for watering plants or landscaping, service or repair of the system, or an emergency shut-off for the system in the event of a malfunction.

Standard Features

►60 month Parts Replacement Warranty