Accessories
Supplies

Sears
Cartridge Filters

  • Sediment/Carbon Pre-Filter for Sears Part # 42-34373, 42-34901

    DPF1/2MIMFSE Substitute Sediment/Carbon Pre-Filter for Sears Part # 42-34373, 42-34901(Must Use With MEM36TFCSE Membrane Filter)

    The DPF1/2MIMFSE (1/2) .5 micron filter uses a Graded Density Core, Carbon Impregnated Micro-Fiber Technology to reduce or remove  Dirt, Iron, Sand, Sediment, Silt, Clay, Cysts, Bacteria, Chlorine, Ammonia Chloramines, Hydro-Carbon Gases, and other fine debris from untreated water. Coconut Shell Carbon Powder is impregnated into thousands of small Micro Fibers that are thermally fused together creating a Modified Carbon Block Filter. Coconut Shell Carbon has much smaller cell sites in the fractionated carbon granules than Bituminous Coal, offering faster adsorption and more retention capacity of the Chlorine, Ammonia, Chloramines, Hydro-Carbon Gases, and VOC’s from the untreated water than Bituminous Coal is capable of. The 1/2 micron Fiber Material Density, and Coconut Shell Carbon Powder combination provides 2-3 times more Volume Weight of Filter  Material when compared to other Dual-Purpose Filters. This filter offers the best removal of Chlorine, Hydro-Carbon Gases, Sediments, Silt, Clay, Cysts, and Bacteria when used as a Primary or Secondary Pre-filter for a Reverse Osmosis Drinking Water System.

    Recommended Service Interval on Most Water Supplies: 3 years

    ½Mic 2½ x 10 Carbon Impregnated Micro-Fiber Filter
    Filter Made in the USA
  • Membrane Filter for Sears Part # 42-34702, 42-34988, 7221217

    MEM36TFCSE (36 gpd) - Substitute Membrane Filter for Sears Part # 42-34702, 42-34988, 7221217 (Must use with DPF1/2MIMFSE Pre-Filter) > 12-150 gpd Membranes Available

    The MEM36TFCSE .001 micron Membrane filter uses a Thin Film Composite Cellular Skin to separate and remove Dissolved Solids, Salts, Minerals, Heavy Metals, Organic Matter, Pyroxene’s, Sub-micron Colloidal matter, Cysts, Bacteria, and other contaminants from untreated water. Water containing Dissolved Minerals and other Contaminants is forced under high pressure through a Semi-Permeable, Spiral Wound, Thin Film Composite Cellular Skin layered in several wrappings, to separate and rinse away the dissolved solids to a sewage drain, leaving only the Pure, H20 water molecules for consumption, production, processing, or manufacturing. The TFC Membrane skin has a broader PH tolerance, can remove a higher maximum threshold of dissolved solids, and removes a higher percentage of dissolved solids than the CTA Membrane is capable of removing. The TFC Membrane can be used on Municipal or Well Water with proper pre-filtration. Typical Rejection of minerals and impurities for the TFC Membrane is 95%-99% removal, compared to 70%-80% for the CTA Membrane. This is the best Membrane available for Residential Reverse Osmosis Systems.

    Recommended Service Interval on Most Water Supplies: 3 years

    TFC Membrane Filter
    Filter Made in the USA
  • Carbon Post-Filter for Sears Part # 42-34370

    The CF1/2MCBSE (½) .5 micron filter uses Solid Pressed Molded Carbon Block Technology to reduce or remove Cysts, Bacteria, Chlorine, Ammonia, Chloramines, Hydro-Carbon Gases, VOC’s, Fine Sediments, Silt, and Clay from untreated water. Small granules of Coconut Shell Carbon are Crushed into Powder, Pressed and Bonded together with a “PATENTED” heat molding process to form a solid BLOCK of Carbon. Coconut Shell Carbon has much smaller cell sites in the fractionated carbon granules than Bituminous Coal, offering faster adsorption and more retention capacity of the Chlorine, Ammonia, Chloramines, Hydro-Carbon Gases, and VOC’s from the untreated water than Bituminous Coal is capable of. The Block Density provides 2-10 times more Volume Weight of Filter Material when compared to other Carbon Filters, also allowing better filtration of the Fine  Sediments, Silt, Clay, Cysts, and Bacteria. This filter provides the best protection against VOC’s, Hydro-Carbon Gas, Cyst and Bacteria Contaminants when used in a Reverse Osmosis Drinking Water System as a Storage Tank Post-filter.

    Recommended Service Interval on Most Water Supplies: 3 years

    CF1/2MCBSE - Substitue Carbon Post-Filter for Sears Part # 42-34370

    ½Mic 2½ x 10 Carbon Block Filter
    Filter Made in the USA
  • Carbon Pre-Filter for Sears Part # 04238476000

    The CF10MCBSEML 10 micron filter is a Proprietary product designed exclusively for the Microline filter housings, and with some Proprietary filter products the consumer compromises the Purity and Safety of their drinking water because of performance limitations associated with the size, design, and choice of material used in manufacturing the filter. This filter uses Extruded Carbon Block Technology to reduce or remove Chlorine, Hydro-Carbon Gases, Sediments and other debris from untreated water. Small granules of Bituminous Carbon are crushed and molded into long solid Blocks of Carbon and then cut to specific lengths. Ammonia, Chloramines, VOC’s, Silt, Clay, and Bacteria pass through this filter because of the Carbon used and larger micron rating. This filter provides reasonable protection against Chlorine and Hydro-Carbon Gas contaminants when used in a Reverse Osmosis Drinking Water System as either a Membrane Pre-filter or Storage Tank Post-filter.

    Recommended Service Interval on Most Water Supplies: 3 years

    CF10MCBSEML - Substitute Carbon Pre-Filter for Sears Part # 04238476000   (must use with MEM36TFCSEML (36 gpd), MEM50TFCSEML (50 gpd) Membrane Filter) > 12 - 150 gpd membranes available

    Sears Carbon Block
  • Membrane Filter for Sears Part # (36 gpd) 625.385700, 625.384720, 625.385720, 7267962, 7264223, (50 gpd) 625.384750, 625.385750, 7267970, 7266186

    The MEM36TFCSEML (36 gpd), MEM50TFCSEML (50 gpd) .001 micron Membrane filter is a Proprietary product designed exclusively for the Microline filter housings, and with some Proprietary filter products the consumer compromises the Purity and Safety of their drinking water because of performance limitations associated with the size, design, and choice of material used in manufacturing the filter. This Membrane uses a Thin Film Composite Cellular Skin to separate and remove Dissolved Solids, Salts, Minerals, Heavy Metals, Organic Matter, Pyroxene’s, Sub-micron Colloidal matter, Cysts, Bacteria, and other contaminants from untreated water. The TFC Membrane skin has a broader PH tolerance, can remove a higher maximum threshold of dissolved solids, and removes a higher percentage of dissolved solids than the CTA Membrane is capable of removing. The TFC Membrane can be used on Municipal or Well Water with proper pre-filtration. Typical Rejection of minerals and impurities for the TFC Membrane is 95%-99% removal, compared to 70%-80% for the CTA Membrane.

    Recommended Service Interval on Most Water Supplies: 3 years

    MEM36TFCSEML (36 gpd), MEM50TFCSEML (50 gpd) - Substitute Membrane Filter for Sears Part # (36 gpd) 625.385700, 625.384720, 625.385720, 7267962, 7264223, (50 gpd) 625.384750, 625.385750, 7267970, 7266186 (must use with CF10MCBSEML Carbon Block Pre-Filter) > 12-150 gpd membranes available

    Clack 35GPD TFC Membrane Filter for Microline Systems
  • Carbon Block Post-Filter for Sears Part # 04238476000

    The CF10MCBSEML 10 micron filter is a Proprietary product designed exclusively for the Microline filter housings, and with some Proprietary filter products the consumer compromises the Purity and Safety of their drinking water because of performance limitations associated with the size, design, and choice of material used in manufacturing the filter. This filter uses Extruded Carbon Block Technology to reduce or remove Chlorine, Hydro-Carbon Gases, Sediments and other debris from untreated water. Small granules of Bituminous Carbon are crushed and molded into long solid Blocks of Carbon and then cut to specific lengths. Ammonia, Chloramines, VOC’s, Silt, Clay, and Bacteria pass through this filter because of the Carbon used and larger micron rating. This filter provides reasonable protection against Chlorine and Hydro-Carbon Gas contaminants when used in a Reverse Osmosis Drinking Water System as either a Membrane Pre-filter or Storage Tank Post-filter.

    Recommended Service Interval on Most Water Supplies: 3 years

    CF10MCBSEML - Substitute Carbon Block Post-Filter for Sears Part # 04238476000

    Sears Carbon Block
  • Carbon Pre-Filter for Sears Part # 42-34709, 7109902, 7148964, 34709

    CF1/2MCBSE - Substitue Carbon Post-Filter for Sears Part # 42-34370

    The CF10MCBSE 10 micron filter uses Extruded Carbon Block Technology to reduce or remove Chlorine, Hydro-Carbon Gases, Sediments and other debris from untreated water. Small granules of Bituminous Carbon are crushed and molded into long solid Blocks of Carbon and then cut to specific lengths. Ammonia, Chloramines, VOC’s, Sediment, Silt, Clay, and Bacteria pass through this filter because of the Carbon used and larger micron rating. This filter provides reasonable protection against Chlorine and Hydro-Carbon Gas contaminants, and is better suited for Bath, Kitchen, Bar, or Island Sink Faucets and Shower Heads, as a Pre-Filter for a multistage Reverse Osmosis system, or as a Pre-filter for Tubs, Tanks, Pitchers, etc.

    Recommended Service Interval on Most Water Supplies: 3 years

    10 Mic 2½ x 10 Ecowater Carbon Block Filter
  • Membrane Filter for Sears Part # 42-34706, 7109897, 7165762, 3470699, 34706

    MEM12TFCSE392 - Substitute Membrane Filter for Sears Part # 42-34706, 7109897, 7165762, 3470699, 34706 (Must Use With CF10MCBSE Carbon Block Filter) > 24-150 gpd Membranes available

    The MEM12TFCSE392 .001 micron Membrane filter uses a Thin Film Composite Cellular Skin to separate and remove Dissolved Solids, Salts, Minerals, Heavy Metals, Organic Matter, Pyroxene’s, Sub-micron Colloidal matter, Cysts, Bacteria, and other contaminants from untreated water. Water containing Dissolved Minerals and other Contaminants is forced under high pressure through a Semi-Permeable, Spiral Wound, Thin Film Composite Cellular Skin layered in several wrappings, to separate and rinse away the dissolved solids to a sewage drain, leaving only the Pure, H20 water molecules for consumption, production, processing, or manufacturing. The TFC Membrane skin has a broader PH tolerance, can remove a higher maximum threshold of dissolved solids, and removes a higher percentage of dissolved solids than the CTA Membrane is capable of removing. The TFC Membrane can be used on Municipal or Well Water with proper pre-filtration. Typical Rejection of minerals and impurities for the TFC Membrane is 95%-99% removal, compared to 70%-80% for the CTA Membrane. This is the best Membrane available for Residential Reverse Osmosis Systems.

    Recommended Service Interval on Most Water Supplies: 3 years

    18 gpd Ecowater 7109897, 7165792, 7165788 TFC Membrane Filter
  • Inline Carbon Post-Filter for Sears Part # 42-34709, 7115296, 7150709, 7132599, 34350

    CF1/2MILCBSE - Substitute Inline Carbon Post-Filter for Sears Part # 42-34709, 7115296, 7150709, 7132599, 34350

    The CF1/2MILCBSE (1/2) .5 micron filter uses Solid Pressed Molded Carbon Block Technology to reduce or remove Cysts, Bacteria, Chlorine, Ammonia, Chloramines, Hydro-Carbon Gases, VOC’s, Fine Sediments, Silt, and Clay from untreated water. Small granules of Coconut Shell Carbon are Crushed into Powder, Pressed and Bonded together with a “PATENTED” heat molding process to form a solid BLOCK of Carbon that is encapsulated inside a plastic vessel housing. Coconut Shell Carbon has much smaller cell sites in the fractionated carbon granules than Bituminous Coal, offering faster adsorption and more retention capacity of the Chlorine, Ammonia, Chloramines, Hydro-Carbon Gases, and VOC’s from the untreated water than Bituminous Coal is capable of. The Block Density provides 2-10 times more Volume Weight of Filter Material when compared to other Inline GAC Carbon Filters, also allowing better filtration of the Fine Sediments, Silt, Clay, Cysts, and Bacteria. This filter provides the best protection against VOC’s, Hydro-Carbon Gas, Cyst and Bacteria Contaminants when used in a Reverse Osmosis Drinking Water System as either a Membrane or Storage Tank Post-filter.

    Recommended Service Interval on Most Water Supplies: 3 years

    ½Mic 2½ x 10 Inline Carbon Block Filter1
    Filter Made in the USA
½Mic 2½ x 10 Carbon Block Filter
TFC Membrane Filter
½Mic 2½ x 10 Carbon Impregnated Micro-Fiber Filter1
10 Mic 2½ x 10 Ecowater Carbon Block Filtershortie
18 gpd Ecowater 7109897, 7165792, 7165788 TFC Membrane Filter1
½Mic 2½ x 10 Inline Carbon Block Filter
Clack 35GPD TFC Membrane Filter for Microline Systems2
Sears Carbon Block1
Sears Carbon Block1